| 1. | These formulae give us the stress and strain in a prismatic beam when it is subjected to pure bending .
当棱柱形梁受纯弯曲时，这些公式给出了它的主力和主变。 |
| 2. | In a beam type compensator a stress pattern produced by pure bending is frozen into the material .
在梁式补偿器中，其应力光图是由纯弯曲产生而被冻结在材料之中。 |
| 3. | According to the original assumption, this theory should be applied only to long, thin beams loaded in pure bending .
根据原来的假定，这个理论只适用于受纯弯曲载荷的长而薄的梁。 |
| 4. | Verification regulation of rotating pure bending fatigue testing machines
旋转纯弯曲疲劳试验机检定规程 |
| 5. | Buckling of thin - walled members under pure compression and pure bending with shear effect
纯压或纯弯薄壁杆件的稳定分析 |
| 6. | Application of fiber model method to concrete - filled rectangular steel tubes with pure bending
纤维模型法在矩形钢管混凝土纯弯构件中的应用 |
| 7. | Optimization algorithm for large deformation of a cantilever beam with elastic - perfectly plastic model under pure bending
纯弯曲理想弹塑性模型梁大变形的优化算法 |
| 8. | Meanwhile , the springback potential energy principle is applied to calculate the springback deformation of a pure bending of curved beam
同时，应用该回弹势能原理于纯弯曲梁的回弹变形计算。 |
| 9. | The bending fracture problems of cracked plate for anisotropic functionally graded materials under loads of pure bending , pure twisting or bending and twisting are discussed
摘要探讨各向异性功能梯度材料裂纹板受纯弯、纯扭、弯扭载荷作用下的弯曲断裂问题。 |
| 10. | Its reliability has been tested though examining . the influence laws of mould structure , including wiper die and the style , size and installed position of mandrel , have been studied . combined with the theoretical analysis of perfect pure bending , the tendency of relative bending radius r / d and relative wall thickness t / d to one of the major quality target - the maximum wall thickness reduction ratio is also studied
通过数值模拟研究获得了包括防皱块和芯棒形式、尺寸和安装位置在内的模具结构对制件成形质量的影响规律；结合对理想纯弯曲的理论分析，研究获得了相对弯曲半径r / d 、相对壁厚t / d对制件主要质量指标之一的最大壁厚减薄率的影响趋势和大小。 |
